Python Rubber Grip Installation Instructions

Q. What is the best way to install a Python RUBBER Grip on a Racquetball Racquet?

A.

1. Remove the wristlacer from the racquet.
2. Stretch the tapered end of the grip.
3. Rub grip between your hands to warm it.
4. Use rubber cement, WD40, Mineral Spirits, or hairspray as a lubricant. Note: Keep lubricant off outside surface of the grip and hands to facilitate a secure grip when installing. The lubricant will evaporate and the grip will then produce a tight bond.
5. Most players hang the "stabilizing rings" slightly over the end for best performance.
6. Allow at least 1 hour before use.
7. If all else fails, take it to your club's stringer and let him/her do it.

Python Super Tack Grip Installation Instructions

Q. What is the best way to install a Python RUBBER SUPER TACK Grip on a Racquetball Racquet?

A.

1. Remove the wristlacer from the racquet.
2. Remove original grip from the racquet, including any staples or tape down to the graphite of the frame
3. DO NOT USE GLUE - Hairspray or WD40 is the best option
4. Stretch the tapered end of the grip.
5. Rub grip between your hands to warm it.